Date: Fri, 4 Nov 1994 17:46:24 -0600
From: billpr@ids.net (Bill J. Parker)
Subject: comm/tcp/scr-ids-world-network



--========================_12021677==_
Content-Type: text/plain; charset="us-ascii"

 The attatched file is an InterSLIP Gateway Script I've written for the IDS
World Network (155.212.1.2). I wrote some instructions at the top of the
script, to explain it a little. The script works with the current IDS
Gateway (July 1994), and will be updated as the gateway changes.
 The file has been checked with Disinfectant 3.5

Please post to the archives.



--========================_12021677==_
Content-Type: text/plain; name="scr-IDS-BJP"; charset="us-ascii"
Content-Disposition: attachment; filename="scr-IDS-BJP"

!
!	InterSLIP Gateway Script for the IDS World Network (155.212.1.2)
!						Version 1.0 (7/10/94)
!						Bill J. Parker (billpr@ids.net)
!
!	To use, simply place inside the "Gateway Scripts" folder in the InterSlip
folder
!	in your Preferences folder in your System Folder (whew!) and then select
it from
!	the pull-down menu in the InterSLIP Setup window. You should configure your IP
!	address in the Setup window as well. Leaving 1006 for MTU is a good idea, too
!	(something is needed in the IP and MTU fields, as well as the
Username/Password
!	fields, in order for this script to work. Contact support@ids.net if you
aren't
!	sure what your IP is (although it should also be configured in MacTCP by now).
!	The IDS World Network doesn't support this script (but I don't think they mind
!	me doing it :-) so DON'T send questions to them about it, send all
questions about
!	the script to me, since I wrote it. I DO NOT GUARANTEE THAT THIS SCRIPT
WILL WORK
!	ON ALL MACINTOSH MACHINES (ALTHOUGH I'VE GOT NO IDEA WHY IT WOULDN'T) AND
I REALLY
!	REALLY DO NOT ACCEPT RESPONSIBILITY FOR ANY LOSS OF DATA OR ANYTHING ELSE
!	RESULTING FROM THE USE OF THIS SCRIPT (except of course when it works fine).
!	I really hope nothing bad happens, though. --==[BJP]==--
!	I will try to update the script for all IDS login changes in a timely fashion.
!
@originate
note "Waiting for prompt..."
matchclr
matchstr 1 1 "login: "
matchread 60
note "No Login prompt"
jump 99
!
! If the Login prompt appeared, send the account name and wait for
! the password prompt
!
@label 1
note "Sending Account Name..."
write "^5\13"
matchclr
matchstr 1 2 "Password: "
matchread 60
note "No password prompt!"
jump 99
!
! Send the password...
!
@label 2
note "Sending Password..."
write "^6\13"
matchclr
matchstr 1 4 "Packet mode enabled"
matchstr 2 3 "Login incorrect."
matchread 120
jump 99
!
! If something went wrong...
!
@label 3
note "Login incorrect!"
!
!Gereral purpose error handler.
!
@label 99
pause 1
sound
pause 60
exit -1
!
! If the login was successful, then set IP/MTU (which are configured in
! InterSlip Setup)
@label 4
note "Setting IP..."
SetIP "^7"
note "Setting MTU..."
SetMTU "^9"
note "SLIP Enabled!"
exit 0
!
! Answer and Hangup are currently unused in gateway scripts, but the
! manual suggests using them for future compatibility.
!
@answer
@hangup
exit 0


--========================_12021677==_--